Can you design a system around our powder process?
Yes. We use your material, process and site information to define the equipment scope and line layout.
Industries / Chemical processing
Chemical powder handling and mixing systems
We engineer powder handling, dosing and mixing systems for chemical processes. Share the material and process requirements, and we can design a line section or a complete system.
Chemical process equipment should be selected around the material, process and site.
We define the handling and mixing sequence from the material information and process requirements. Our scope can include layout, equipment, PLC control and installation and commissioning support.
Materials and what makes them hard
The material, the problem, our answer
| Material | The problem | How we handle it |
|---|---|---|
| Inorganic salts | Bulk ingredients need controlled conveying and dosing to meet the process sequence. | We can integrate screw conveyors, weighing hoppers, load cells and PLC recipe control according to the required process. |
| Detergent and personal care powders | A process may require repeatable batching and mixing across multiple powder ingredients. | We can configure batch weighing, PLC recipes and batch records with a twin-shaft mixer sized to the process. |
| Pigments and additives | Feeding and mixing arrangements need to reflect the material characteristics and process requirements. | We select conveying, metering and mixing equipment based on the customer's process information and specified requirements. |
| Corrosive materials | Materials and operating conditions must be reviewed to determine suitable corrosion-resistant equipment details. | We manufacture corrosion-resistant twin-shaft mixers. The required configuration is determined from the material and process conditions. |
Equipment
The equipment involved
- 01
Dosing and weighing
Batch and loss-in-weight dosing can be configured to meet the process requirements.
- 02
Twin-shaft mixers
Twin-shaft mixers combine powder ingredients, with batch discharge capacity selected for the process.
- 03
Conveyors and feeders
Conveying equipment transfers ingredients between storage, dosing and mixing stages.
- 04
Dust collection
Dust collection can be included at selected material handling points in the line.
- 05
Bulk bag unloading
A bulk bag unloading station provides a defined point for feeding material from big bags into the process.
A typical line
How a typical line runs
Dust extraction at every transfer point
- 01Receive and store ingredients
- 02Feed and convey to dosing
- 03Weigh ingredients by recipe
- 04Mix in the selected mixer
- 05Discharge and transfer the batch
The actual configuration follows your material, rate and site.
Our experience
Our listed chemical projects include six corrosion-resistant mixers for a Guangdong daily chemical industrial park in 2023. A 2025 project for an industrial customer in Vietnam included a mixer, dust collector, screw conveyor and valves.
Vietnam
Industrial customer Mixer with dust collectors, screw conveyors and valves
2025 · Shipped
Guangdong, China
Household-chemicals industrial park Six anti-corrosion mixers
2023 · Delivered
Questions buyers ask
How do you select a mixer for corrosive materials?
We review the material and operating conditions first. We manufacture corrosion-resistant twin-shaft mixers, with the configuration determined for the application.
Can the system record recipes and batches?
PLC recipe control and batch records can be included according to the project requirements.
Next step
Tell us these
- The materialWhat it is, bulk density, particle size, moisture and temperature. Sticky, abrasive or corrosive?
- The processThe recipe or ratios, batch or continuous, and what comes before and after.
- The rateTonnes or batches an hour, and hours a day.
- The siteSpace and height available, existing silos or equipment to connect to, and the supply voltage.
Not sure yet?
Send the material and the process. Our engineers look at it first and come back with a proposed solution and configuration.